Fixes: - S3 or S4 cycling may be cause an error of RAID1 volume - Operating system crashes when scan for and attempt recovery of bad sectors w/ RAID0 volume - Attempting to Accelerate a hot-inserted HDD induces an Unknown error and causes the Accelerate button to disappear in the user interface - Acceleration status is always ‘No Sync’ in the OROM after changing Smart Response Technology mode via the user interface - RAID ‘Create’ button is available in user interface on system with Cache enabled when it is should not be shown - Revert changes to support Acceleration after hot-unplug and re-insert of SSD - Unable to modify cache volumes when maximum volume count is reached and volumes cannot be accelerated - Driver prevents SSD from being used as cache after hot-plugged and hot-inserted - RAIDCFG32 displays incorrect results - User Interface mouse-over in Acceleration mode shows conflicting data for an Accelerated disk - From the 'Configure Volume' page on the 'Create' tab, the 'Specify the volume size:' and 'Advanced' sections are un-selectable by standard keyboard methods. - Obscured text string in the "Enable Acceleration" window under the "Select the disk or volume to accelerate:" selection box - does not wait long enough for device to become ready per ATAPI 7 and ATAPI 8 specification - RST Caching fails to resume from S4 after entering OROM>Acceleration Options and sometimes causes BSOD 0050 & 0051 - RST user interface exposes option to create additional matrix RAID volume when the maximum possible number of RAID volumes has been reached - An unknown error is induced if user attempts to change the type of a second R1 volume while a create volume from disk R1 migration is occurring - Intel Smart Response Technology is not honoring user's power plan - When trying to enable acceleration, the disk selection screen displays full disk capacity, max 64 GB for the cache which is not true at all times - Accelerated pass-through data disk: Error message displayed in user interface when trying to use a different SSD to Accelerate the disk after auto-transition Enhanced mode to OFF due to missing Cache SSD - Email Notify Setup step 2 in help is obsolete - "Disk data cache" resets to "enable" after resuming from S4/S5 in user interface - RCfgSata utility Successfully Accelerates an Invalid Smart Response Technology Volume with 2 SSDs in Max mode. - System does not reconstruct data after a S3 is performed from windows which may lead to possible OS corruption - “Enable Acceleration” is available to user after cache hot-plugged and hot-inserted without a system reboot.
Скачать